Our range of Climate Control System is extensively used in agricultural and horticultural industries. Our range includes greenhouse cooling system, greenhouse heating system, greenhouse humidification fogging system, greenhouse climate control system etc. All these greenhouse systems are designed with perfection and provide superior performance. These greenhouse systems are made by using supreme quality material. Moreover, it is widely demanded in different commercial and residential areas.
HABPL with its intensive research and development has come up with a unique design of a drop hamper exhaust fan system.
| BLADE DIA | CFM @ 0 SP | RPM | BODY SIZE | WATT |
| 609 mm (24") | 6900 | 960 | 710 | 370 |
| 1100 mm (36") | 13600 | 600 | 1270 | 750 |
| 1270 mm (50") | 25890 | 440 | 1380 | 100 |
| 1400 mm (55") | 32842 | 325 | 1530 | 1500 |
HABPL's cooling pad is made of fluted cellulose sheets that are glued together.
Cellulose sheet is treated with unique ingredients to achieve high cooling efficiency and degradation resistance.
Aluminum Frame For Cooling pad is Exclusively designed for the cooling pads systems installed in a big length. This specially designed aluminum alloy with anodizing to make it rust free and long lasting. The design is considered for the easy installation and maintains. The special design provides uniform distribution of water and wet the pads evenly. The drain water is connected to the tank. This system also includes the drain valves, line filters and by pass systems.
The moving air removes moisture from the plant canopy, resulting in a drier microclimate. When leaf temperatures are allowed to cool much below the air temperature, the dew point is reached and condensation occurs, providing an ideal environment for disease organisms. Radiant cooling on clear nights, especially in noninfrared poly covered houses, will cool plant leaves several degrees below air temperature.
| Sr. No | Technical Specification | Details |  |
| 1 | Model | GTACF-40-70 | |
| 2 | Size in MM | D320 MM X H 400 MM | |
| 3 | Frame Material | Stainless Steel | |
| 4 | Blade Materials | Aluminium Powder Coated | |
| 5 | Nos. of Blades | 7 nos. | |
| 6 | Frequency | 50 HZ | |
| 7 | Speed | 1400 rpm | |
| 8 | Voltage | 220 v | |
| 9 | Air Volume | 5300 | |
| 10 | Power | 120 w | |
| 11 | Weight | 8 kg | |
| 12 | Phase | Single ph | |
| 13 | Air Thro | 70 ft |
| Sr. No | Technical Specification | Details |  |
| 1 | Model | GTACF-55-90 | |
| 2 | Size in MM | D320 MM X H 550 MM | |
| 3 | Frame Material | Stainless Steel | |
| 4 | Blade Materials | Aluminium | |
| 5 | Nos. of Blades | 5 nos. | |
| 6 | Frequency | 50 HZ | |
| 7 | Speed | 1400 rpm | |
| 8 | Voltage | 220 v | |
| 9 | Air Volume | 8700 | |
| 10 | Power | 180 w | |
| 11 | Weight | 12 kg | |
| 12 | Phase | Single ph | |
| 13 | Air Thro | 90 ft |
Greenhouse electric heater is basically an electric space heater which is used for maintaining the temperature inside greenhouse. This greenhouse electric heater is completely insulated with metal shield to protect it from harsh environmental conditions. Furthermore, it is also equipped with wire guards on both sides. This greenhouse electric heater helps in providing protection from condensation and corrosion. It is integrated with cartridge heating element which is made up of stainless steel. This greenhouse electric heater can be customized in different specifications ranging from 3 KW.
Hot water or steam leaves the boiler and is pumped into the greenhouse via a pipe network or unit heaters, or both. The pipes are typically located overhead and above the crop, or alternatively may be located beneath the benches and on the perimeter walls, or in a combination of each. Floor heating is another method to heat the greenhouse with hot water. Hot water unit heaters are another option for delivering heat into the greenhouse.
High-pressure fogging systems pumps help alleviate excessive heat often found in outdoor venues. They release an evaporative ultra-fine fog, reducing temperatures in the immediate area and also increases the humidity inside without falling the droplet on the leaves.
Our fog irrigation systems are designed for adjustable for flow rates and droplet size and this can be achieved by using the right kind of nozzle. It can also help with regulating the water pressure hence making it suitable for humidification, cooling, irrigation and application of fertilizers or pesticides.
Send Email
